Koolgrips Jack Handle Covers
- 1½” foam insert — real cushioning that protects your vehicle from dents and dings
- Heavy-duty #10 nylon zipper — won’t scratch paint, opens and closes smoothly for fast on/off
- Rubberized coating — wipes clean in seconds, stands up to daily shop use
- Double-sewn, glued seams — reinforced construction built for repeated, heavy-duty use
- Anti-microbial, antibacterial fabric — stays cleaner and fresher between uses
- Soft rubber grip top — a secure, comfortable hold every time you lift
- Two lengths, two colors — 45″ and 48″, in Black or Red
- Seconds-fast installation — no tools required
| Spec | Detail |
|---|---|
| Available lengths | 45″, 48″ |
| Colors | Black, Red |
| Foam insert | 1½” thick |
| Zipper | Heavy-duty #10 nylon, paint-safe |
| Outer material | Rubberized coating, double-sewn and glued seams |
| Fabric treatment | Anti-microbial, antibacterial |
| Compatibility | Fits standard auto shop and floor jack handles (jack handle not included; specific diameter not listed by manufacturer) |
| Care instructions | Clean with a degreaser or dish detergent (e.g. Dawn); line dry only — avoid harsh solvent-type cleaners |
45’’ Jack Handle Cover
Hand Grip: For easy installation, we recommend installing the hand grip first. Simply getting it wet it will easily slip over the top of the handle.
Foam Insert: Install foam insert under hand grip.
Protective Cover: Begin at the top of the handle and clasp the zipper together. While zipping, keep the zipper aligned with the foam insert. Continue zipping toward the bottom of the floor jack.
48’’ Jack Handle Cover
Hand Grip: For easy installation, we recommend installing the hand grip first. Simply getting it wet it will easily slip over the top of the handle.
Foam Insert: Install foam insert under hand grip.
Protective Cover: Begin at the top of the handle and clasp the zipper together. While zipping, keep the zipper aligned with the foam insert. Continue zipping toward the bottom of the floor jack.
Bottom Grip: For easy installation, remove the handle from the jack. Wet the grip and slide up from the bottom of handle to the bottom of the protective cover. Check to see if the handle will fit back into the jack; if not you may have to trim the grip with a cutting tool such as a pair of scissors.
To remove grease and other debris you may use simple green or any other degreaser to wipe the cover. You may also hand-wash the cover with Dawn dish detergent. Line dry only. Do not use harsh solvent-type cleaners or protectants like Scotch Guard or Armour-All to the covers.
KoolGrips Jack Handle Covers slip over your floor jack or auto shop jack handle to protect both your hands and your vehicle’s paint. A rubberized, foam-cushioned grip with a heavy-duty nylon zipper installs in seconds and cleans up just as fast — available in 45″ and 48″ lengths, in Black or Red.
$59.95
Protect your hands, your paint, and your jack handle — all at once.
A bare metal jack handle is hard on hands and even harder on the vehicles around it. One slip and you’re looking at a scratch or dent that takes far longer to fix than the job you were doing. KoolGrips Jack Handle Covers solve that with a simple, durable upgrade: a rubberized, foam-cushioned cover that zips directly over your existing jack handle in seconds.
Built for daily use, each jack handle cover features a 1½” foam insert for real cushioning, a soft rubber top section for a secure, comfortable grip, and a heavy-duty #10 nylon zipper that won’t scratch paint or catch on fabric. The outer shell is reinforced with double-sewn, glued seams and finished with an anti-microbial, antibacterial coating that wipes clean with a degreaser or a little dish soap — no special cleaners required.
This auto shop jack handle cover was designed with professional shops in mind, where a jack handle gets used dozens of times a day and every minute spent wrapping a handle by hand is a minute of billable time lost. But it works just as well as a floor jack handle grip in a home garage, protecting both the tool and whatever vehicle it’s leaning against.
Installation takes seconds: wet the grip section slightly, slide it over the top of the handle, position the foam insert underneath, and zip from top to bottom with the zipper aligned along the foam. Available in two lengths — 45″ and 48″ — and two colors, Black and Red, so it fits most standard jack handles. (Jack handle itself is not included.)